Handbrake video encoding software running under Xubuntu Linux

Lessons learned encoding media under linux

Hardware and Linux Distribution Differences This post covers a bunch of areas of media decoding and encoding that I’ve discovered over a number of years using Debian-based distributions like Xubuntu, and Linux Mint. Primarily I’ll cover some of the differences between Xubuntu and Linux Mint, how various hardware (CPUs and graphics cards) encode video, and some of the “gotchas” when it comes to different methods as they apply to Handbrake (software) and MakeMKV. ...

January 23, 2025 · 8 min
TrueNAS server dashboard

Our TrueNAS Server

It lives, it dies! Our new TrueNAS server is up, and all the hardware is working, but not without some hiccups on the way. After taking a lot longer to build than expect, I was so happy the other evening when I posted about the successful Power On Self Test (POST), and the new RAM (32GB) being properly detected. Exhausted at the end of the day I left the drives disconnected and the video card out. ...

September 27, 2024 · 6 min
Unpacking the NAS case

Building the NAS - hardware hiccups

Most of the hardware is assembled The past few weeks have been extremely busy, so I knew last night would probably be the only time I would get this week to work on the NAS. I’m glad I started building the NAS last night as it took much longer than anticipated. I finally finished the build at 10pm last night (and it’s still not quite complete). Fig 1. I used an Intel Core i3-7100 CPU for lower power consumption ...

September 25, 2024 · 6 min
Left - our media centre

Transitioning our KODI media centre

Moving more to a low-power solution Several months back I replaced the motherboard in the KODI media centre PC that sits in our living room. For many years our media centre has been rocking a Gigabyte motherboard with a second generation Core i7-2600 CPU. The Core i7-2600 came out in Q4 of 2010, making it almost 14 years old at the time I’m writing this. Still, it’s not a bad CPU. For several years it was the system I was compressing our movie collection on as the A8-5600K 4 core APU that was in my workstation (at the time) had about half the performance of the i7-2600. But about six months ago I replaced the CPU and motherboard with a still old, but more modern solution, a MSI motherboard and an Intel Core i3-7100. ...

August 15, 2024 · 7 min
Dell PowerEdge T110 II workstation

Dell PowerEdge T110 II Network Attached Storage (NAS) build

Migrating the KODI entertainment system On May 5th I mentioned that we’re Running out of space on our media center. In the comments of that post I followed up outlining a plan to buy another 8TB drive (for a total of 3 x 8TB drives) in order to do a RAID Z1 (for 16TB of space). But in order to do that I would need to reformat the drives, which means I also needed a plan to back up our media center data. I hinted at that solution in the comments too: 4 x 3TB drives in a RAID Z1 – which would give me 9TB of space (1 x 3TB is the spare), just enough to back up all the data. ...

June 1, 2024 · 4 min
HP LaserJet 1320 laser printer close up

Adding a laser printer as a shared network printer in Xubuntu Linux

Switching printers at home Other than running out of toner, there was nothing wrong with the HP Laserjet P1102w printer we have at home. The printer printed cleanly, was compact, and was connected to our wireless network, so any machine on our network could print to it. In fact, I was planning on buying more toner this evening after we did our usual scouring of thrift shops. I thought there was a small chance I might find the right HP 85A toner at one of the stores we planned to go to. I did find some other toner at one of the thrift shops, and the $5.95 price tag wasn’t bad, but it was for a different model in the same line of printers. But this was actually after spotting an even better deal, an HP Laserjet 1320 duplex printer for a whopping $10.95. ...

May 5, 2024 · 4 min
Core usage encoding Blu-Ray quality files

Handbrake performance on more than 6 cores

Diminishing returns after 6 cores, but not for all media Handbrake is a video transcoder. It’s normally used to convert and compress video from a format into a more compressed format. Handbrake comes in a command line version, handbrake-cli, and a graphical version, handbrake. I’ve seen it mentioned several times that Handbrake is best at 6 cores or less, after that the encoding returns are diminishing. I thought this was the case with some of my experimentation, but it seems the answer is more complicated – it depends. ...

March 20, 2023 · 3 min